Anchorages

Miller Fall Protection MC00 Work Positioning Lanyard

Miller Fall Protection MC00 Work positioning lanyard in 12mm polyamide rope
Standard: EN358 Length: 2m

Only £81.50

(£67.92 ex VAT)

Protecta Viper Fall Arrest Rope Grab & Strap AC401

Protecta Viper Fall Arrest Rope Grab & Strap AC401. Ultra compact, the Viper is an automatic antifall for braided rope of 10,5 mm diameter. Viper slides freely on the rope and blocks in case of a fall. Its system of ultra-easy opening allows Viper to be put or removed from any place of the rope. Once connection karabiner was put back in place, Viper is locked and ready for the use.

Only £81.95

(£68.29 ex VAT)

3M DBI Sala webbing girder loop 200cm length KM421

sala webbing girder loop 200cm length KM421

Only £89.00

(£74.17 ex VAT)

3M DBI Sala 3M DBI-SALA Advanced Bare Steel Uni-Anchor with Tie-Off - For Fall Arrest Post 8567412

3M DBISALA Advanced Bare Steel Uni-Anchor with Tie-Off - For Fall Arrest Post 8567412

Only £95.00

(£79.17 ex VAT)

Protecta Automatic Fall Restraint Rope Grab Viper AC400

Protecta Viper2 Automatic Fall Arrest Rope Grab AC400.

Only £99.95

(£83.29 ex VAT)

Protecta Stainless Steel Cable 8mm 7x19 for Cabloc Fall Restraint AC300S

3M Protecta Cabloc Steel Cable 8mm 7 x 19 for Cabloc Lifeline Fall Restraint Devices AC300S

Only £100.95

(£84.13 ex VAT)

Protecta Fall Restraint Anchorage Point AM201

Fall Restraint Anchorage Point AM201.

Only £101.95

(£84.96 ex VAT)

Protecta Counter Weight for Cabloc AC323

Counter Weight for Cabloc AC323.

Only £112.95

(£94.13 ex VAT)

3M DBI Sala Re-useable Concrete D-Ring Anchor 2104565

SALA Re-useable Concrete D-Ring Anchor 2104565. Re-useable D-ring assembly, just install a new bolt and it's ready for use again. Rugged design for harsh environments with no moving or fragile parts to foul-up. Safe hook-up indicator notifies the user the anchor has been installed properly. For flexibility, install into 18mm or 19mm holes - only standard drill bits needed. 22.2kN rated, CE - EN795 compatible connection point swivels 360° for safety and usability. Concrete D-ring Anchor and Bolts 2104565: D-ring Assembly with 1 Bolt 2104566: D-ring Assembly with 6 Bolts 2104567: D-ring Assembly with 12 Bolts

Only £113.95

(£94.96 ex VAT)

P+P Temporary Chimney Anchorage System

Temporary Chimney Anchorage System. 7m x 16mm nylon hawser laid rope fitted with a man-u-just unit and supplied with a 76031 karabiner and 4 wear sleeves

Only £153.95

(£128.29 ex VAT)

Protecta Universal Cabloc Anchoring System AC340

3M Protecta Universal Cabloc Anchoring System AC340. Universal top and bottom anchor plate.

Only £154.95

(£129.13 ex VAT)

P+P Temporary Anchorage Horizontal Lifeline

Temporary Anchorage Horizontal Lifeline. P+P temporary webbing lifeline (additional end connections may be needed)

Only £193.95

(£161.63 ex VAT)

3M DBI Sala Saflok™ Concrete Wedge Anchor Model 2100100

3M DBI SALA Saflok Concrete Wedge Anchor 2100100. Reusable Concrete wedge anchor for connection into a 19mm hole in solid concrete with swivelling D-ring to attach to.

Only £195.00

(£162.50 ex VAT)

Protecta TDS84 Removable Bolt Anchors

TDS84 Removable Bolt Anchors

Only £195.00

(£162.50 ex VAT)

P+P P P Temporary Flangebar Anchorage Clamp

Temporary Flangebar Anchorage Clamp. Anchorage clamp that attaches quickly to the top or bottom of horizontal 'I beams' with a hold bar and removable pin.

Only £203.95

(£169.96 ex VAT)

P+P P+P Temporary Winsafe 3 Person Fall Arrest Post

Temporary Winsafe 3 Person Fall Arrest Post. Transportable anchorage post with three swivel connection points, that is locked into a base plate to create an attachment point. Locks into a base plate with two locking pins. A 90348 base plate is required

Only £210.95

(£175.79 ex VAT)

Spanset Horizontal Safety Line with loops HSL-LL Ergo

Only £229.95

(£191.63 ex VAT)

Protecta COBRA Rope Grab Fall Arrester AC20202 with Shock Absorber

Protecta COBRA Rope Grab Fall Arrester AC20202 with 200mm with Shock Absorber

Only £243.95

(£203.29 ex VAT)

3M DBI Sala Re-Useable Detent Wall Anchor 2101005

Sala Detachable Re-Useable Detent Wall Anchor 2101005. Utilising pre-installed sockets in to concrete, the detent wall anchor allows the user to connect and disconnect from an anchorage point simply by pressing a button. Options: 2101005: Assembly including Pin, Socket and Cap 2101003: Detent Pin 2101001: Detent Socket and Cap Specifications: Weight: Detent Anchor : 0.25kg - Socket : 0.16kg Material: 316 Stainless steel Standards: OSHA, ANSI, CE - EN795 Class A, Class B Rated capacity: 1 user - 141kg Minimum breaking strength: 22 kN

Only £102.95

(£85.79 ex VAT)